Top Doorstep Bike Service Start-ups in India

Getting a new bike can be a fascinating time for customers. We all like keeping our things as though they are brand new. This is a habit that pays you over time. Proper maintenance of your bike or any automobile for that matter can reward you with a longer vehicle life as well as significantly lesser running costs during your ownership of the bike. So, embrace the benefits of online chat and ensure your new bike receives the care it deserves for a rewarding ownership experience.

Tips for Proper Bike Maintenance

Follow the Bike Manual

Everyone gets a manual along with the bike that lists information about every component of your two-wheeler and how to operate and take care of the same. As a bike owner, it is necessary to go through this manual. The manual introduces you to every part of your bike and its maintenance schedule. It gives you maintenance suggestions on oil type, service procedures, etc. It is important that you read the manual thoroughly and follow the instructions.

Regularly Check Tyres

It is important to check your bike tyres regularly – A thorough look at the condition of your bike and the air pressure. Make sure that the tyres air pressures are maintained at the levels which are recommended by your bike manufacturer. Do check tyres for possible cuts and scrapes that could cause a undesirable things like tyres blowout. Do not forget to check your tyres treads at least once in a week. Also check for the wheel balance and alignment.

Change Engine Oil

The engine oil determines the quality of your ride and also the life of your engine. It keeps the engine cool, ensures your ride is smooth and lubricates the engine parts. Dirty engine oil reduces fuel efficiency and engine life due to excessive wear and tear. High acidity in the engine oil can cause internal corrosion. Check the oil level after every service and make sure you change it as and when required

Maintain healthy Brake Pads

It is critical to maintain the thickness and effectiveness of your brake pads. Worn brake pads can trigger a tragic accident. Brake pads should be replaced when they wear down to 2 mm or less. Expert mechanics recommend that you should inspect your brake pads every 3,000 to 5,000 miles (5,000 to 8,000 km). Brake wear is mainly determined by your driving habits and the area in which you live. Brake pads wear out faster in places with a lot of slopes and frequent starts and stops.

Check the Transmission System

A bike’s chain needs regular lubrication, adjustment and cleaning for its smooth functioning. Wash the chain using paraffin and then take a soft brush or piece of cloth to remove dirt particles from this chain. However, never use water to wash a bike's chain as it can rust the chain links. After washing, use a clean and dry cloth to wipe the chain.

Engine

Engine is the heart of your bike – Servicing your bike regularly and tuning it up would keep the engine running like clockwork, thus reducing your petrol bills. Do pay special attention, while cleaning the carburetor and maintaining valve clearances. Remember to keep carburetor always clean. For every 1500 kilometers which you travel, clean out the carburetor float chamber as well as the other parts. Do not neglect the all-important spark plug.

Checking Up the Bike Chain

The chain is what sends power from your engine to the rear wheel which is why it has to be in great shape. It has to be clean and well lubricated and also set in a way that is not too loose or too tight. To clean your bike’s chain you need a chain cleaner and a chain cleaning brush but you can also get away by using an old toothbrush.

In the unlubricated stage, adjusting your chain can be a nerve-wracking thought. But it is simpler than it sounds. What you need to do is get the correct spanners and loosen the large bolt that keeps the axle in place once that's done you'll have to loosen the first small nut that sticks out at the end of the swing-arm.

However, before making any adjustments check the slack of the chain. A chain that is too loose can cause the chain to come off the sprocket. On the other hand, a chain that is set too tight can cause abnormal wear on your sprockets or even snap in most cases. The chain should have about 25 mm of vertical movement but it's best that you refer to your instruction manual to find out what's best for your bike.

Conclusion

In conclusion, owning a bike comes with the responsibility of maintaining it properly to ensure a longer vehicle life and lower running costs. Following the manufacturer's manual is crucial as it provides valuable information on maintenance schedules and procedures. Regularly checking and maintaining the tyres, engine oil, brake pads, transmission system, and chain is essential. Ignoring these areas can lead to accidents and excessive wear and tear on the bike's components. Keeping the bike clean and well-lubricated is crucial for its proper functioning. By following these simple tips, bike owners can enjoy a smooth and safe ride for years to come.