If you Learn this you will Become a Real Rubik's Speedcuber

It seems like every person in the room is staring at you angrily. You and the dozens of other Rubik's cubes on the table are being illuminated by the bright light of the spotlight. Your face is covered with a thin film of sweat. The alarm has sounded and the timer has expired. You reach for a beginner's cube and start clicking away at it until you find the solution. Getting the colours on each side of a level one cube needs just a few simple actions, making it a good starting point for beginners. Whether you're a beginner seeking guidance or an experienced solver looking for ways to enhance your skills, Rubik's Cube apps can be valuable tools in your journey.

How to Solve a Rubik's Cube for Beginners?

Find the white piece at the cube's base

Don't take the risk if it's a corner piece. If you must choose, choose the piece that will allow you to construct a cross. Keep it flat on the ground as you slide it along to get it lined up, and then rotate it 180 degrees. A straight line may be calculated from the white squares in the upper section, where the white centrepiece was located. The following step, completing the cross, is when things get a little hairy. Be careful not to break the line you just established.

Take a look at the board and see if you can see the other white pieces hiding in the background

After moving the white piece you're aiming for to the right side of the board, you might feel as if you're changing the whole structure by switching the top section anticlockwise. The last component of the cross will need to be found after this. You might find it somewhere in the centre of the basement. If it is in the centre, you may bring it all the way down to the bottom and then back up again until you have the cross.

The centre squares will be next to their coloured neighbors

Put your left thumb in the cube's middle, your right finger on its base, and your other right finger on its top. If you want to get ready to shift, flip the right side up. You can get the upper half to come closer to you if you use your right index finger. Next, using your left index finger, twist the upper half back down once you've turned the right side down. And in your direction, simply keep doing this till you begin to notice some colour matching and combination O.

What you just did with your right hand was correct?

You must now master the left-hand strategy. Position your fingers by resting your right thumb in the cube's centre and your left thumb and middle finger on the bottom and top, respectively. Turn the cube towards you by twisting it clockwise with your left hand and pulling the top. Make another downward turn with your left hand on the component. Next, bring the upper half closer to you by squeezing it with your right index finger. The left and right hands will be in continual motion, circling the body. Maintain this process for some time. Finding the white area in the upper right corner is the next stage.

Pay close attention to the colours around it

Given their proximity to white, you'll need to choose a destination for them. Verify that the colours bordering the white piece are evenly distributed around the cube's centers. If the colour scheme is green and orange, the White Center square should start off in the same spot. You should then see a green centre and an orange centre. Hence, the green piece should go towards the green centre, and the orange piece should head towards the orange centre.

Just utilize the same right-hand combo techniques you used before

You should now have all the white squares on one side. Next, look for the yellow centre piece and see if you can put together the surrounding sections that are missing it. On one of the top pieces, you could discover orange and blue glued together. You'll have to relocate them if you do. Separate them using the same right-hand combination you used to join them, and then use the same left-hand combination you used to join them.

The white area will stay put on one face of the cube

You'll need to keep looking for pairs of cube parts that aren't identical in colour, and then use those pairs over and over again to sort the cube's components into their appropriate piles. One side, however, will be chosen at random. Now, please don't freak out. Involvement of this kind is inevitable. Don't move the section with the haphazardly placed colours.

Repeat the right hand motion while you rotate the layer in front of you clockwise

Next, rotate the layer such that it is facing you once in the other direction (anticlockwise). If the top takes the form of an L, you should turn it such that the leftmost point of the L points upwards. The edge of a cube. To undo the front layer and return it to its original state, just spin it clockwise using the right hand combination again.

Well, you've nearly reached the finish line

The Yellow Cross is now shown prominently on the upper side. The next stage is arranging the remaining parts in a U formation. It's possible to align all four, or it's possible to align only two, depending on your method of choice. Two soft crosses should be worn on the back and right side. Lift the right side, slide the top layer to the left, then lower the right side again. Shift the uppermost layer to the left a second time, and then bring the right side back up.

If you switch the right piece with the left one

Take a peek at the corner pieces and make sure the outer corner's three colours are correctly placed. If none of them are where they should be, you'll need to try a different combination. Turn it over by using your left index finger to bring the top layer towards you, and then the left layer up. To continue, repeat steps 1 and 2, but this time bring the right side and the left side down.

Each Rubik's Cube may be solved by using the same principles to this one

Hence, everyone is looking at you while you carry out the procedures. In a flash, your fingers cut through the cubes so quickly that they lose clarity. When you've solved a couple, though, you'll start to see more unusual forms, such pyramids and polygons. Despite appearances, they are solved using the same methods as a standard Rubik's Cube.

Conclusion

In conclusion, solving a Rubik's Cube can be a challenging but rewarding task. The first step is to locate the white piece at the cube's base and construct a cross. Next, align the centre squares with their coloured neighbors. After this, locate the white area in the upper right corner and pay close attention to the colours around it. Use the right-hand combination technique to arrange the cube's components into their appropriate piles. Next, rotate the layer in front of you clockwise and align all four remaining parts in a U formation. Finally, ensure that the outer corner's three colours are correctly placed and switch the right piece with the left one if necessary. With practice, anyone can master the art of solving a Rubik's Cube.